Efficient partial hydrogenation of trichloromethyl to gem-dichloromethyl groups in platinum on carbon-catalyzed system

While gem-dichloromethyl groups can be directly synthesized by the mono-dechlorination of the corresponding trichloromethyl groups, the suppression control of the over-reduction to form chloromethyl or methyl functionalities is quite difficult. We have established the efficient and widely applicable mono-dechlorination method of the trichloromethyl groups to form the corresponding gem-dichloromethyl groups using platinum on carbon in dimethylacetamide as a specific solvent at 25 °C under a hydrogen atmosphere. The mono-dechlorination of the α,α,α-trichloromethylcarbonyl groups smoothly proceeded by the use of platinum on carbon as a catalyst in a highly chemoselective manner, while the efficient mono-dechlorination of the alkyl- and aryl-trichloromethyl groups required the combined use of Bu₃SnH.     

Synthesis of the C22-C37 segment of prorocentin

The synthesis of the C22-C37 segment of prorocentin, isolated from the dinoflagellate Prorocentrum lima, was achieved. Because the relative stereochemical relationship between C26 and other stereocenters (C28/C31/C32 established as R*/R*/R*) in the C22-C37 region of natural prorocentin has not yet been determined, both epimers at C26 of the C22-C37 segment were selectively constructed. The synthesis was based on a 5-exo epoxide ring opening reaction to form an oxolane (E-ring), Brown asymmetric methallylation to install the C26-stereocenter, acryloylation of the resulting alcohol, and ring-closing olefin metathesis to establish the Z-olefin at C23/C24.     

Radiation in a hypersonic shock layer generated around a projectile

Radiation emitted from the shock layer generated around a hypersonic flight model is experimentally investigated by using a ballistic range (two-stage light-gas gun). A polyethylene projectile of 1.2 cm in diameter is launched in this facility at the velocity of 5 km/sec (M=15), and the emission from the induced shock layer around the projectile is observed with a spectroscope. As a result, molecular band-spectra from NO and N₂ are detected along with those from carboncontaining molecules. Total emission power is measured with a diode-type powermeter. In addition, dimension effect of the flight model is theoretically and numerically examined, and a scaling law on thermochemical structure of the shock layer is developed. It shows that the thickness of thermal boundary-layer formed on the model surface does not follow the conventional scaling law based on the reaction distance and on the energy relaxation distance. Finally, the radiative field around the projectile is numerically computed, and the total power emitted from the shock layer is estimated. From the comparison between computed and measured results, the validity of the calculation model is discussed.     

Complexation of acyclic ligands having two terminal quinoline units with alkali metal cations

Abstract

Acyclic multidentate ligands consisting of an oligooxyethylene chain (di-, tri-, tetra-, and penta-) and two terminal rigid quinaldate end groups were newly prepared and their complexation properties with alkali metal cations were estimated by the solvent extraction method to indicate a better affinity for K⁺. Among them, the tetraethylene glycol derivative showed the highest K⁺ binding on about the same level as 18-crown-6. Their conformations in solution and in the solid state were examined by using ¹H- and ¹³C-NMR spectroscopy and X-ray crystal analyses, respectively. The better binding of K⁺ in comparison with the corresponding glymes or analogues having the same donor sites was reasonably explained by considering the effective co-ordination of the carbonyl oxygen of the ester groups and the parallel π-stacking interaction between two quinaldate surfaces.     

Analysis of labor productivity using large-scale data of firm’s financial statements

We investigated labor productivity distribution by analyzing large-scale financial statement data consisting of listed and unlisted Japanese firms to clarify the characteristics of the Japanese labor market. Both high and low productivity sides of the labor productivity distribution follows the power-law distribution. Large inequality in the low productivity side was observed only for the manufacturing sectors in Japan fiscal year (JFY) 1999 and observed for both the manufacturing and non-manufacturing sectors in JFY 2002. The decline in the Japanese GDP in JFY 1999 and JFY 2002 were coincided with the large inequality in the low productivity side of the distribution. A lower peak was found for all non-manufacturing sectors. This might be the origin of the low productivity of the non-manufacturing sectors reported in recent economic studies.     

Antimony as a traffic-related element in size-fractionated road dust samples collected in Buenos Aires

The growing interest of public opinion in environmental problems conducted us to investigate the levels of a toxic traffic-related element such antimony in 19 size-fractionated street dust samples. Samples were collected in the megacity of Buenos Aires during two months at 19 sites with different urban characteristics and traffic profile. Samples were sieved in four fractions (F1 < 37 µm, F2: 37-55 µm, F3: 55-75 µm and F4: 55-100 µm) before elemental analysis. A mixture of aqua regia and hydrofluoric acid was used to digest all samples. Antimony concentrations were quantified by inductively coupled plasma optical emission spectrometry (ICP OES) or flow injection hydride generation-atomic absorption spectrometry (FI-HG-AAS).Twenty four out of 73 sub-samples analyzed showed Sb levels < 0.05 µg g^− 1; in the rest of the samples mean Sb concentrations varied from 1.4 to 20.4 µg g^− 1. Maximum and minimum concentrations (in µg g^− 1) found in individual samples in the four fractions were: Fraction 1, < 0.05-20.4; Fraction 2, < 0.05-18.4; Fraction 3, < 0.05-6.3; Fraction 4, < 0.05-7.7.Antimony was found to be enriched in the smallest size fraction of road dust, with mean enrichment factors varying between 27 (F3) and 272 (F1). Concentrations of Sb were correlated with those of other traffic-related elements such as Cu and Pb and higher levels were found in areas with medium and high traffic densities.     

Flow structure of knuckling effect in footballs

The flight trajectory of a non-spinning or slow-spinning soccer ball might fluctuate in unpredictable ways, as for example, in the many free kicks of C. Ronaldo. Such anomalous horizontal shaking or rapid falling is termed the ‘knuckling effect’. However, the aerodynamic properties and boundary-layer dynamics affecting a ball during the knuckling effect are not well understood. In this study, we analyse the characteristics of the vortex structure of a soccer ball subject to the knuckling effect (knuckleball), using high-speed video images and smoke-generating agents. Two high-speed video cameras were set at one side and in front of the ball trajectory between the ball position and the goal; further, photographs were taken at 1000 fps and a resolution of 1024×512 pixels. Although in a previous study (Taneda, 1978), shedding of horseshoe vortices was observed for smooth spheres in the Reynolds number (Re) range of 3.8×10⁵<Re<10⁶, in the case of the soccer ball, the vortex structure, which consisted of distorted loop vortices, appeared in the wake behind the ball in the supercritical Re number region. Moreover, after the knuckleballs were airborne, large-scale undulations were observed in the vortex trail visualised with a smoke technique. On the other hand, aerodynamic forces acting on the ball were estimated from the data of the ball’s flight trajectory, and a statistically high correlation (r=0.94, p<0.01) between the fluctuation frequency of the lift and side forces and the undulation frequency of the vortex trail was shown to exist. This fact suggests that the phenomenon of large-scale undulations of the vortex trail is closely related to the cause of the unsteady aerodynamic forces acting on the knuckle ball.     

Development of Polarized HD Target for Future LEPS Experiments at Spring-8

We are carrying out hadron photoproduction experiments by using polarized photon beams at SPring-8 in Japan.In 2005,we started developing a polarized HD target for future experiments using both the polarized photon beams and the polarized target.The polarized HD target is an idealistic target for experiments observing reactions with small cross sections because the HD does not include heavy nuclei which produce many background events.The measurement of double polarization asymmetries is expected to give much important information to investigate the nucleon hidden structure,hadron photoproduction dynamics,and exotic hadron property.We report on the present status of the development of the polarized HD target al RCNP.     

Ellipsometry characterization of a-Si:H layers for thin-film solar cells

In order to determine microscopic structures of hydrogenated amorphous silicon (a-Si:H) layers incorporated in a-Si:H-based thin-film solar cells, the spectroscopic ellipsometry (SE) analysis of a-Si:H layers prepared by plasma-enhanced chemical vapor deposition has been performed. In particular, we have characterized the a-Si:H layers by applying a new dielectric function model that allows the evaluation of the SiH₂ bond densities in a-Si:H networks. This model is based on our finding that the a-Si:H dielectric functions in the visible/ultraviolet region vary systematically with the formation of SiH₂-clustered microvoids. We have applied this model to estimate the SiH₂ content in a-Si:H layers fabricated on glass substrates, on which the characterization of the SiH₂ bonding is generally difficult. The validity of the SE analysis has been confirmed from the direct characterization of the SiH_n local structures using infrared ellipsometry.